Capillary electrophoresis-acid barrage stacking online enrichment method for highly sensitive determination of four isoflavones

A capillary electrophoresis-acid barrage stacking online enrichment method has been established to detect the four isoflavones which are Daidzein, Genistein, Formononetin, and Biochanin A. The proposed method was optimized using a single factor alternative method, and the optimal conditions obtained from the optimization were: the BGE was 25 mM borax and 2 mM β-cyclodextrin, the applied separation voltage was 20 kV, and the detection wavelength was 260 nm. The time ratio of the injection of sample and the injection of acid was 150 s:20 s, and the acid used was 250 mM acetic acid. The sample solvent used was 60% v/v acetonitrile. The established method had the enrichment factor of these four isoflavones at 24.5, 32.0, 29.2, and 33.7, respectively, LOD and LOQ are as low as nanograms per milliliter. Finally, the CE-acid barrage stacking method was successfully applied to the determination of four isoflavones in rat plasma and red clover extract, verifying the applicability and feasibility of the method.     

Effect of non-covalent interactions in 2,5-di-Me-pyrazine-di-N-oxide - methanol – Carbon nanotube electrocatalytic system

Catalytic oxidation of methanol (MeOH) in the absence of noble metals and noble metal oxides as catalysts, and the use of metal-free materials are inexpensive and attractive process for practical use in electrocatalysis, sensors, and in direct methanol fuel cells. In previous works, it was found that the use of single-walled (SWCNT) or multi-walled (MWCNT) carbon nanotube paper electrodes instead of GC increases the catalytic efficiency of organic compounds oxidation in the presence of aromatic di-N-oxides by several times. In this work, the effect of non-covalent interactions on the catalytic efficiency of MeOH oxidation in the presence of 2,5-di-Me-pyrazine-di-N-oxide (Pyr₁) in 0.1 M Bu₄NClO₄ solution in acetonitrile at SWCNT and MWСNT paper electrodes was studied by the methods of quantum chemical modeling, Raman spectroscopy, and using electrochemical data. New factors determined the features of mechanism of MeOH oxidation on CNT electrodes and lead to an increase in the catalytic efficiency of the electrode process in comparison with the GC electrode were established.     

Experimental study on synchrotron radiation photoionization of secondary organic aerosol derived from styrene ozonolysis

Secondary organic aerosol (SOA) produced by ozonolysis of styrene and other alkene compounds is a major part of fine particles in urban atmospheres. The atmospheric ozonolysis process of styrene is simulated in a smog chamber, and the formed SOA particles are detected on-line by a synchronous radiation vacuum ultraviolet photoionization mass spectrometer (VUV-PIMS) in this study. Through molecular ion peaks in the photonionization mass spectra of SOA and the corresponding photoionization efficiency curve, combined with off-line measurement verification of ultraviolet visible and infrared absorption spectra, it is determined that formaldehyde, formic acid, benzene, phenol, benzaldehyde, and benzoic acid are the main constituents of styrene SOA. These provide new information for studying the atmospheric ozonolysis oxidation mechanism of styrene. VUV-PIMS can get over complicated sample preparation procedures, secondary pollution, and other shortcomings of the off-line method and is a useful instrument to measure constituents and unveil the formation process of SOA particles.     

Local inverse inelastic mean free path at interface

We calculated a local inverse inelastic mean free path (local-IIMFP) for electrons crossing a medium–medium interface, considering various incident electron energies, crossing angles and combinations of materials. We used an extension of a classical dielectric model developed by Li and co-workers for an electron crossing a surface (interface vacuum-medium). Moreover, the integration over the distance of the local-IIMFP allows to obtain the interface excitation parameter (or IEP) characterizing the change in excitation probability for an electron crossing an interface once caused by the presence of the interface in comparison with an electron for which only volume excitations are considered. We perform these calculations for angles between 0° and 80°, for electron energies between 500 and 2500 eV and for various pairs of materials, as Al/In for its academic interest or Au/Si and SiO₂/Si for their technological importance. Small but not negligible variations of the local-IIMFP and the IEP were observed for metal–metal or metal–semiconductor interfaces, while quite significant variations are obtained when one of the materials is a insulator.     

Front Cover: Enhancement of dielectrophoresis-based particle collection from high conducting fluids due to partial electrode insulation

Dielectrophoresis (DEP) is a successful method to recover nanoparticles from different types of fluid. The DEP force acting on these particles is created by an electrode microarray that produces a nonuniform electric field. To apply DEP to a highly conducting biological fluid, a protective hydrogel coating over the metal electrodes is required to create a barrier between the electrode and the fluid. This protects the electrodes, reduces the electrolysis of water, and allows the electric field to penetrate into the fluid sample. We observed that the protective hydrogel layer can separate from the electrode and form a closed domed structure and that collection of 100 nm polystyrene beads increased when this occurred. To better understand this collection increase, we used COMSOL Multiphysics software to model the electric field in the presence of the dome filled with different materials ranging from low-conducting gas to high conducting phosphate-buffered saline fluids. The results suggest that as the electrical conductivity of the material inside the dome is reduced, the whole dome acts as an insulator which increases electric field intensity at the electrode edge. This increased intensity widens the high-intensity electric field factor zone resulting in increased collection. This informs how dome formation results in increased particle collection and provides insight into how the electric field can be intensified to the increase collection of particles. These results have important applications for increasing the recovery of biologically-derived nanoparticles from undiluted physiological fluids that have high conductance, including the collection of cancer-derived extracellular vesicles from plasma for liquid biopsy applications.     

Overreact,an in silico lab: Automative quantum chemical microkinetic simulations for complex chemical reactions

Today's demand for precisely predicting chemical reactions from first principles requires research to go beyond Gibbs' free energy diagrams and consider other effects such as concentrations and quantum tunneling. The present work introduces overreact, a novel Python package for propagating chemical reactions over time using data from computational chemistry only. The overreact code infers all differential equations and parameters from a simple input that consists of a set of chemical equations and quantum chemistry package outputs for each chemical species. We evaluate some applications from the literature: gas-phase eclipsed-staggered isomerization of ethane, gas-phase umbrella inversion of ammonia, gas-phase degradation of methane by chlorine radical, and three solvation-phase reactions. Furthermore, we comment on a simple solvation-phase acid–base equilibrium. We show how it is possible to achieve reaction profiles and information matching experiments.     

Identification of the precursor cluster in thermolysin crystallization solution by molecular dynamics methods

An analysis of the crystal structure of thermolysin revealed four possible precursor clusters (hexamers) of its crystal. Using the method of molecular dynamics and plots of root mean square fluctuation, root mean square deviation and radius of gyration, the most stable hexamer, which is a precursor cluster,was determined. The importance of the established structure of the thermolysin precursor cluster for determining the mechanism of crystal formation is shown.     

大学化学习题课的困境与有效教学策略

结合大学化学的教学现状,针对学生的需求,深入思考在教学过程中设置习题课的重要性和相关问题。从教师素质、班级规模、教学方法、习题构建与讲解以及考试等不同角度提出有效提高习题课效率的策略。进一步探讨线上线下混合式习题课教学模式的可行性,并提供可参考的教学案例,以期促进大学化学专业课程的教与学。     

电感耦合等离子体质谱（ICP-MS）法测定黄精中15种稀土元素及其指纹图谱绘制

为了准确测定黄精中稀土元素的含量,采用电感耦合等离子体质谱（ICP-MS）法同时测定黄精中15种稀土元素（La、Ce、Pr、Nd、Pm、Sm、Eu、Gd、Tb、Dy、Ho、Er、Tm、Yb、Lu）的含量,进而绘制稀土元素指纹图谱,以稀土元素含量的平均值构建黄精稀土元素标准指纹图谱,作为鉴定黄精中药材的参考依据。黄精样品采用微波消解法处理后,通过在线引入内标溶液,采用ICP-MS法测定15种稀土元素的含量,采用OriginPro 2021绘制稀土元素指纹图谱和进行主成分分析,采用SPSS 26.0进行聚类分析。15种稀土元素的线性关系、重复性、精密度良好,平均加标回收率在97.0%~103.3%,相对标准偏差小于等于1.74%。黄精中Ce、La、Nd含量相对较高,Ce含量为53.02～2004.58 μg/kg,位居第一。聚类分析和主成分分析结果表明,样品聚为2类,同一产地的样品能够较好地聚在一起。黄精药材中15种稀土元素的指纹图谱具有相似的分布形态,具有较强的特征性和一致性,相似度均大于0.950。该方法操作简单,准确可靠,能满足实验分析要求,可为黄精的质量控制和药理研究提供参考;建立的指纹图谱可用于黄精的鉴别。